PLEXTOR

PX-R412CSE

Device Type                 External CD Recorder/Reader
Interface                   SCSI
Spin Rate (Read/Write)      1X, 2X, 4X, 8X 12X (Read) / 1X, 2X, 4x (Write)
Formats Supported Read      CD-XA, CD-DA, CD-R, CD-I, CD-ROM (Mode 1 & Mode
                            2), Photo-CD, Video CD, Red & Yellow Book,
                            CD-Plus, CD-Extra
Formats Supported Write     CD-XA, CD-DA, CD-R, CD-I, CD-ROM (Mode 1 & Mode
                            2), Photo-CD, Video CD, Red & Yellow Book,
                            CD-Plus, Enhanced CD, CD+G, CD-Midi, CD-Text
View                        Top








                                CONNECTIONS

         Function             Label         Function            Label

  Audio line out - left            CN1      Audio line           CN2
                                            out - right

                              DRIVE SELECT ID

  To set the SCSI ID, turn the dial on SW2 to the SCSI ID number that you
  would like to select. The default SCSI ID setting is 4.

                         USER CONFIGURABLE SETTINGS

                      Setting                       Label      Position

  í Parity check enabled                            SW1/1         On

  Parity check disabled                             SW1/1        Off

  í Termination enabled                             SW1/2         On

  Termination disabled                              SW1/2        Off

  í Factory configured - do not alter               SW1/3        Off

  í Block mode disabled                             SW1/4        Off

  Block mode enabled                                SW1/4         On

  í Flash upgrade disabled                          SW1/5        Off

  Flash upgrade enabled                             SW1/5         On


                                             CONNECTIONS

                      Function                                            Label

  Headphone jack                                                            CN3

                             DIAGNOSTIC LED(S)

     LED          Color          Status                Condition

     LED1         Orange           On               Recording at 1X

     LED1         Orange          Off           Recording at 2X or not
                                                   recording at all

     LED2         Orange           On               Recording at 2X

     LED2         Orange          Off           Recording at 1X or not
                                                   recording at all

     LED3         Green            On         Power is on and no disc is
                                                    loaded in drive

     LED3         Green         Blinking       Disc is being accessed by
                                                         drive

     LED4         Green            On           Power is on and disc is
                                                    loaded in drive

     LED4         Green           Off                Power is off

  Note: When drive is recording at 4X, both LED1 and LED2 will be on at
  the same time.